Taftbond HM969G is a green, neoprene-based spray-grade contact adhesive for fast, even coverage over large and complex surfaces. It bonds stainless steel, natural rubber, most plastics, wood, rock wool, veneers and PU foams, with good heat, aging and water resistance.
PRODUCTS · CONTACT ADHESIVE
Taftbond HM969G
Sprayable neoprene contact adhesive for fast, even coverage over large panels.
Sibling products: Taftbond 5 Minutes Epoxy Taftbond HM105NF Taftbond HM232ST Taftbond Solid Surface Adhesive
Industries: Metal Fabrication, Transportation, Woodworking
Contact AdhesiveMetalPlasticsCompositesWoodRubber
Service temp
up to 60 °C
Cure speed
Tack-free 5 to 10 minutes (30C)
Headline properties for Taftbond HM969G. Full specification is available on request.
Specifications last reviewed
Specifications
| SKU | HM969G |
|---|---|
| Chemistry | Neoprene (rubber polymer) |
| Appearance | Green liquid |
| Viscosity | 80-100 cps (Brookfield, spindle 5 rpm) |
| Fixture time | Tack-free 5 to 10 minutes (30C) |
| Shelf life | 12 months (at 25C) |
| Packaging | 20 litre drum |
Substrate compatibility
- Metal
- Plastic
- Composite
- Wood
- Rubber
- Fiberglass
Not recommended for: Polypropylene (PP), polyethylene (PE), Teflon, silicone and expanded polystyrene foam
Technical Data Sheet
Download the current Technical Data Sheet for full specification, handling, and cure data. The complete TDS library cross-references every MightyLoc family by chemistry, substrate, and service window.
Compliance
RoHS statements and Safety Data Sheets for this product are available on request. Contact the MightyLoc team and we will send the current documents.
Foam bonding · 2 points
01 / 02
Spray both foam faces
Taftbond HM969G is a spray-grade neoprene adhesive. Spray an even coat onto the foam and the surface it joins, covering at least 90 percent of each face.
02 / 02
Bond once tack-free
Once both coats tack off, press the parts together. It bonds PU foams, rubber and rock wool, which suits upholstery, insulation and cushioning.
Tap a point on the image to see where and how to apply.
Panel laminating · 2 points
01 / 02
Spray panel and veneer
Spray a moderate, even coat on the panel and the veneer or laminate, at least 90 percent coverage on each.
02 / 02
Press from the centre out
When tack-free, bond from the centre outward and apply roller pressure for a consistent, lump-free film on wood panels.
Tap a point on the image to see where and how to apply.
Application guidance last reviewed
Technical tools: Cure-time guide Service-temperature guide Substrate-pair selector
Frequently asked questions
It is a spray-grade contact adhesive for conventional air-assisted spray equipment. Spray an even coat on both surfaces, let it tack off, then bond under firm roller pressure. Coverage is about 7 m2 per litre.
It is not suitable for polypropylene (PP), polyethylene (PE), Teflon, silicone or expanded polystyrene foam.
HM969G bonds stainless steel, natural rubber, most plastics, wood, rock wool, veneers and PU foams, per the Vitrochem TDS. It is a versatile contact adhesive for panel and laminate work across these substrates.
HM969G is tack-free in 5 to 10 minutes at 30 C and has an open time of about 30 minutes, per the Vitrochem TDS. Bond the surfaces within the open time, after the coat has tacked off but before it dries out.
The cured HM969G bond has a temperature resistance of up to 60 C per the Vitrochem TDS, alongside good resistance to ageing, water and non-aromatic fuels.
HM969G should be applied between 15 C and 35 C per the Vitrochem TDS. It has a 16% solid content, and a moderate even coat gives a coverage of about 7 square metres per litre.
HM969G is supplied in a 20 litre drum and has a 12-month shelf life when stored at around 25 C in a cool, dry place away from direct sunlight and open flame.
HM969G is a green coloured liquid per the Vitrochem TDS. The colour makes it easy to see where the adhesive has been sprayed, so you can confirm an even coat and at least 90% coverage on both surfaces before bonding.