5 Minutes Epoxy
Taftbond™ 5 Minutes Epoxy is a 2 component adhesive that comprises a Resin and Hardener that bonds to all type of metals, wood, glass and most plastics rapidly when the 2 parts are mixed equally in volume or weight by ratio.
Comparing to conventional super glue or rubber cement, Taftbond™ 5 Minutes Epoxy has higher bond strength and good performance reliability when parts that need to be fixed or bonded together. It has ability withstand higher temperature than the regular adhesives and minimal shrinkage when fully hardened or cure.
This epoxy adhesive is formulated to handle almost all types of fixturing and bonding of materials (except for polypropylene, polyethylene, silicone rubber and polyamide) rapidly that will allow users to use the bonded parts in less than 15 minutes without any whitening issue.
It is a must have adhesive for household, art & craft, car workshop,
TAFTLOCK 22 Low Strength
Taftlock™ 22 is a fast-curing, low-strength anaerobic thread-locking compound for bonding and sealing threads, and retaining of cylindrical parts. Taftlock™ 22 is highly resistance to heat, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Features
- 100% solvent free
- Vibration resistant
- Corrosion prevention
- Ideal for screws size 6mm and below.
- Able to lock and seal securely within a short time.
- Functional cure within 3 hours
- Excellent temperature resistance between -55°C to 150°C.
- Good chemical resistance.
- Long shelf life of 12 months.
Specifications
Applications
- Automotive
- Bicycle
- Motorcycle
- Household Appliances
- Spectacle
- Electronics Devices
Directions
- Make sure the fastener parts are of the metallic surface.
- Adhesive will not react with non-metal surfaces.
- Clean parts from oils, grease, or any contaminants before applying adhesive.
- Apply adhesive sparingly to the threaded part of the screws.
- Wipe off the excess adhesive from the surface.
- Wipe bottle tip clean after using.
- Store in a cool and dark area.
Taftlock Anerobic Adhesive is not recommended for use in pure oxygen systems. Material removed from containers may be contaminated during use. Do not return the product to the original container. We will not assume responsibility for the product that has been contaminated or stored under conditions that are out of our specifications.
Available Packaging in 50ML & 1 Litre PE Bottle