Multipurpose. High Strength
Spray Adhesive
Taftspray™ 78 Spray Adhesive, is a multipurpose sprayable adhesive made from synthetic-based elastomer that provides exceptional bonding strength for lightweight materials like paper, aluminum foil, cork, and styrene foam. It is formulated to provide a controlled spray pattern and lower misting during spraying. It can be sprayed onto one or double-sided of the materials and it will dry clear without any bleeding through or causing wrinkling on the paper. With its polystyrene foam safe property, it will not cause any melting or dent to the surface when sprayed upon. It is recommended for use in arts & crafts. leather mending, furniture making, foam upholstery, and many lightweight materials bonding purposes.
TAFTSPRAY 78 Spray Adhesive
Taftspray™ 78 is a new generation of aerosol-based sprayable adhesive that is designed to use for lightweight materials bonding purposes. It is a multipurpose adhesive that can be applied on one or two sides for lasting adhesion to almost all types of surfaces. Taftspray 78 is very suitable for artwork mounting, leather bonding, embroidery, plastic signage, woodworking, fabric, and metal applications.
Features
- Multipurpose spray adhesive.
- Controlled spray pattern.
- Dries to clear.
- Will not seep through papers.
- Wider coverage.
- Low misting.
- Polystrene foam safe.
- Fast drying.
- Bonds strongly to lightweight materials.
Specifications
- Solid Content (by weight): 25%
- Base: Synthetic Elastomers
- Colour (wet & dry): Clear
- Spray Pattern: Low mist, fine particles spray
- Flash point: -40C
- % Volatile Organic Content (VOC): 52%
Technical Data Sheet
Directions
- Clean and wipe the surfaces of bonding materials from dust and dirt.
- Make sure there is no oil or grease on surfaces before spraying.
- Use the spray adhesive in a well-ventilated area and cover tables or work areas with protective paper to prevent glue staining.
- If possible, wear a mask during use.
- Hold the can in an upright position, and point the spray valve in the direction of the bonding substrates. Maintain a distance of between 15-20 cm during spraying.
- Spray the adhesive evenly on one or both sides of the bonding surfaces.
- Leave the sprayed surface to dry for about 2-3 minutes for the solvent to totally vaporised before pressing the surfaces together with a hand or roller pressure.
- After use, invert the can upside down and give it a quick purge to clear any blockage that may occur. Wipe the spray valve clean with some cleaning solvents before replacing the cap for storage.
Applications
Art work spray mounting purpose
Art & Craft
Provides a strong bond for leather materials
Leather Craft
Bonding and mounting of lightweight acrylic
Signage
Plywood bonding for woodworking