技术数据表
Code 22
Taftlock 22
Anaerobic Thread Locker
- Issued
- Updated: Sept 2018
- Reviewed
- Page
- 1
PRODUCT DESCRIPTION
TAFTLOCK 22 is a low strength thixotropic anaerobic thread locking compound ideal for bonding and sealing threads, and retaining of cylindrical parts. TAFTLOCK 22 exhibits high resistance to heat, vibrations, water, gases, oils, hydrocarbons and many chemicals.
ADVANTAGES
- Ideal for thread locking small screws from loosening under vibration.
- Ideal for fasteners up to 6 mm diameters.
- Suitable for applications such as adjustment of set screws and small diameter fasteners where easy disassembly is required.
ADHESIVE PROPERTIES
| Composition: | Dimethacrylate Ester |
|---|---|
| Color: | Purple |
| Viscosity: | 1000 cps at 25°C |
| (Brookfield RVT, Spindle 3 @ 20 rpm) | |
| Specific Gravity: | 1.05 |
| Flash Point: | >100 °C |
| Shelf Life: | 2 years |
CURING PROPERTIES
| Handling Cure Time: | 20 minutes |
|---|---|
| Functional Cure Time: | 1 – 3 hours |
| Full Cure Time: | 24 hours |
| Breakaway Torque, ISO 10964: (M10 steel nuts and bolts N.m) | 6 N.m (60 kgf/cm) |
| Prevail Torque, ISO 10964: (3/8 x 16 steel nuts and bolts) | 4 N.m (40 kgf/cm) |
| Temperature Range: | -55 to 150°C |
PHYSICAL PROPERTIES
| Coefficient of Thermal Expansion (ASTM D696, K-1) | 80×10⁻⁶ |
|---|---|
| Coefficient of Thermal Conductivity (ASTM C 177, W/(m.k) | 0.10 |
| Specific Heat (kJ/kg.K) | 0.30 |
CHEMICAL RESISTANCE
| CHEMICAL | TEMPERATURE | % INITIAL STRENGTH RETAINED 500 hours | % INITIAL STRENGTH RETAINED 1'000 hours |
|---|---|---|---|
| Acetone | 22°C | 100 | 80 |
| Ethanol | 22°C | 100 | 100 |
| Motor Oil | 125°C | 100 | 100 |
| Gasoline | 22°C | 100 | 100 |
| Brake Fluid | 22°C | 100 | 100 |
| Water / Glycol | 87°C | 90 | 85 |
APPLICATION METHOD
Surfaces should be dry, clean, and free of any contamination. Thread locker should be applied to the bolt in sufficient quantity to fill threads. TAFTLOCK 22 performs the best in thin bond gaps. This thread locker is specifically formulated to give controlled friction and torque/tension ratio during assembly.
STORAGE
Anaerobic adhesives shall be ideally stored in a cool, dry place in unopened containers at room temperature between 8°C to 25°C. Please do not return any unused material to its original container.
Compliance and quality
Made under the ISO 9001 quality management system of Vitrochem Technology. RoHS declarations and Safety Data Sheets are available on request.