Technical Data Sheet
Acrylic Foam Tape · Code 1120GF
AFT 1120GF
- Issued
- January 2016
- Reviewed
- Page
- 1
Product Description
Mightyloc AFT 1120GF is a grey acrylic foam tape which is designed for a wide variety of bonding applications that require excellent adhesion and durability. It exhibits good chemical & elevated temperature resistance. This tape is suitable for bonding wide range of substrates commonly used in the signage and metal fabrication industries including metal, Aluminum, Stainless steel, Acrylic, glass, etc. The unique viscoelastic properties enable it to elongate, accommodating the different rates of contraction and expansion between dissimilar bonded substrates due to extreme temperature cycle exposure.
Typical Application Areas
- Metal doors stiffeners
- Automotive accessories installation
- Truck canopies fabrication
- Outdoor signages
- Elevator stiffeners bonding
- Building facades installation
Specifications
| Thickness: | 1.20mm |
|---|---|
| Adhesive: | Acrylic |
| Tape Carrier: | Acrylic foam |
| Foam Color: | Grey |
| Release Liner: | Red PE Film |
| Temperature Resistance (°C) – Short Term | ≥160 |
| Temperature Resistance (°C) – Long Term | ≥100 |
| Tensile Strength (gf/cm²) | ≥7’000 |
| Peel Adhesion (gf/cm²) | ≥4’000 |
| Holding Power (Hr.) Stainless Steel, 80°C Temperature 1000 Gram Static Load | ≥24 |
Surface Preparation
All surfaces intended for bonding must be sufficiently and thoroughly cleaned and dried prior to application. Abrading prior to bonding is highly recommended. Surfaces must be free from dust, dirt, oil, grease and residues of any forms. Dirty or contaminated surfaces affect bonding and adhesion strength adversely. IPA or IsoPropyl Alcohol is generally used for general cleaning and Heptane solvent may be used to clean oily or greasy surfaces. Do Not use oil-based solvents for surface preparation prior to bonding.
Storage
It is highly recommended to store this product under constant temperature between 25°C - 30°C. This product should not be exposed to high humidity and direct sunlight during storage. Keep unused product away from dust and grease.
Shelf Life
This product has 24 months shelf life from date of manufacturing.
Limited warranty statement:
Products are warranted to be free of defects in workmanship and material at time of shipment. Vitrochem Technology Pte Ltd will replace or credit any material we determined to be defective. Before using, user shall determine the suitability of the product for its intended use and assumes all risk and liability whatsoever in connection therewith.
Compliance and quality
Made under the ISO 9001 quality management system of Vitrochem Technology. RoHS declarations and Safety Data Sheets are available on request.